LIFTING UNIT FOR REPAIR OF BOREHOLES APR-60/80

LIFTING UNIT FOR REPAIR OF BOREHOLES APR-60/80

The unit is designed for carrying out overhaul repair and development of oil and gas boreholes, and is capable of providing the following operations: transfer from one borehole to another, erection and dismounting operations on borehole, lowering and lifting operations with oil-well tubing and pump rods, fishing and other types of work, boreholes liquidation, sand plugs and cement columns drilling out, milling of metal parts, development of boreholes after drilling, exploratory drilling of boreholes up to 2000 m deep using auxiliary equipment (rotor RM 250 -400 or power swivel).

The unit allows short time loading on hook up to 80 tf in case of tightening, reciprocation, breaking away of parkers etc. meeting all necessary accident control measures during operation with guy lines for fastening to external anchors.

Climatic version-U, arrangement category I acc. to GOST 15150-69 at working temperature of ambient air from –40 to +40 º C.

Main design characteristics and service advantages comparing with domestic analogues:

  • high mobility during erection and dismantling operations due to availability of front and rear outriggers for unit bringing forward as well as possibility to work with anchorless fixing of guys at nominal loads due to small angle of derrick inclination;
  • derrick rear support is made as separate part thus excluding load transfer on unit chassis during operation;
  • spring brake in brake system allows to exclude lowering- in of tackle block during long stay;
  • unit control can be carried out from heated cab and driller’s station.
Technical specifications
Mounting base KrAZ 65053-02, 63221-044 KrAZ 6522
Loading capacity on tackle block
- nominal loading capacity, kN (tf) 600 (60)(without guy wires)
- short time, max. permissible, kN (tf) 800 (80)
Gear box three speed
Main winch single drum
- dia of hoist wireline as per GOST 16853, mm 25
- number of brake pulleys 2
- brake shoe
- brake control foot pneumatic and manual mechanical
- hook lifting speed, max/min, m/s 1,42/0,15
Auxiliary winch hydraulic
- nominal traction power, kN (tf) 16 (1,6)
Derrick telescopic, 2-section derrick with open front side
- height to crownblock axis, m 22,6
- fixing of derrick in operation condition device for anchorless fixing and guy lines for fastening to external anchors
Tackle system/tooling 6-string/3×4
Wellhead bottom operation platform
- overall dimensions, mm 3000×4000
- adjustable height, m 1,0–3,0
Overall dimensions, mm:
length 13000 12700
width 2500 2500
height 4000 4000
Total unit weight (not more), kgf 29600 29400

Note: Upon customer’s request it is possible to install hydraulic drive for bailing winch (installed instead of operator’s cab).

Contact information Contact information Contact information Contact information

Contact informationOil Special Machinery Sales Department

Àäðåñ:423603, Tatarstan, Elabuga, prospect Neftyanikov, 1, Trading House “ELAZ”
Tel.(85557) 5-50-18, 5-51-63
Fax:(85557) 5-51-63
E-mail:tdelaz@elaz.ru
WWW:http://www.elaz.ru
Contact information Contact information

Out partners

Ãîñóäàðñòâåííàÿ òðàíñïîðòíàÿ ëèçèíãîâàÿ êîìïàíèÿ
Ðîññèéñêàÿ Ãîñóäàðñòâåííàÿ Àãðîïðîìûøëåííàÿ Ëèçèíãîâàÿ Êîìïàíèÿ
Ôåäåðàëüíîå àãåíòñòâî ëåñíîãî õîçÿéñòâà
ÎÀÎ «Òàòíåôòü»
Ãîñóäàðñòâåííîå óíèòàðíîå ïðåäïðèÿòèå Ðåñïóáëèêè Òàòàðñòàí «Òàòëèçèíã»
ÎÀÎ «Òàòàãðîëèçèíã»

Statistics

          Rambler's Top100