423603, Russia, Tatarstan,
Elabuga, Prospekt Neftyannikov, 1
Tel.: +7 (85557) 5-57-75
Fax: +7 (85557) 5-57-33
LIFTING UNIT FOR REPAIR OF BOREHOLES APR-80 on KrAZ 65053, 63221 chassis base
APR-80 unit is designed for repair and development of oil and gas boreholes and is capable of providing the following operations: lowering and lifting operations with oil-well and drilling tubing and pump rods, fishing and other types of work, boreholes liquidation, sand plugs and cement columns drilling out, milling of metal parts, exploratory drilling and drilling of small diameter boreholes using auxiliary equipment (rotor RM 250 -560 or power swivel).
Climatic version-U, arrangement category I acc. to GOST 15150-69 at working temperature of ambient air from –40 to +40 º C.
Main design characteristics and service advantages comparing with domestic analogues:
- high mobility during erection and dismantling operations due to availability of front and rear outriggers for unit bringing forward;
- derrick rear support is made as separate part thus excluding load transfer on unit chassis during operation;
- spring brake in brake system allows to exclude lowering- in of tackle block during long stay.
| Technical specifications | |
| Mounting base | KrAZ 65053, KrAZ 63221 |
| Loading capacity on tackle block - nominal, kN | 800 (80) 600 (60) (without guy wires) |
| Gear box | three speed |
| Main winch | single drum, upgraded (reinforced) with two brake rims |
| - dia of hoist wireline as per GOST 16853, mm | 25 |
| - dia of hoist wireline as per GOST 16853, mm | 2 |
| - brake | shoe |
| - hook lifting speed, max/min, m/s | 1,42/0,15 |
| Winch drive | from chassis engine |
| Auxiliary winch | hydraulic |
| - nominal tractive force, kN (tf) | 16(1,6) 30(3,0) |
| Derrick | telescopic, 2-section derrick with open front side |
| - height to crownblock axis, m | 22,6 |
| - fixing of derrick in operation condition | guy lines for fastening to external anchors |
| Tackle system/tooling | 6-string/3×4 |
| - Tackle block | single axis, 3 pulley |
| Wellhead bottom operation platform: | |
| - overall dimensions, mm | 3000×4000 |
| - adjustable height, m | 1,0-3,0 |
| Overall dimensions, mm: - length/width/height | 13120/2500/4300 |
| Total unit weight (not more), kgf | 30000 |
Additional equipment- as per order. It can be equipped with PS95 power swivel (of “Logan Oil Tools “Inc. USA production; authorized distributor in Russia –LLC “Heftepromservis”.
Note: Upon customer’s request it is possible to install hydraulic drive for bailing winch (installed instead of operator’s cab).
Contact informationOil Special Machinery Sales Department
| Адрес: | 423603, Tatarstan, Elabuga, prospect Neftyanikov, 1, Trading House “ELAZ” |
|---|---|
| Tel. | (85557) 5-50-18, 5-51-63
|
| Fax: | (85557) 5-51-63 |
| E-mail: | tdelaz@elaz.ru |
| WWW: | http://www.elaz.ru |
Out partners
Statistics |
|
All rights are protected
423603, Russia, Tatarstan,
Elabuga, Prospekt Neftyannikov, 1
Telephone: +7 (85557) 5-57-75
Fax: +7 (85557) 5-57-33 ?>