LIFTING MOBILE UNIT UPR-100 on KrAZ 63221, KrAZ 7140 N6 chassis base
UPR-100 unit is designed for drilling by rotor and downhole motors of boreholes 2500 m deep (with stand of pipes of 24 kg/m weight), for overhaul repair, development and rehabilitation of oil and gas boreholes up to 5000 m deep (NKT 14 kg/m) and provides the following operations:
transfer from one borehole to another;
erection and dismounting operations on borehole;
lowering and lifting operations with oil-well tubing and drill pipes which are installed in vertical position by pipe setbacks and pump rods;
fishing and other types of work, boreholes liquidation;
sand plugs and cement columns drilling out;
milling of metal parts;
development of boreholes after drilling etc.;
second borehole kickoff and borehole drilling.
The unit meets the requirements of labour safety standards as well as “Safety rules in oil and gas industry” PB 08-624-03 for units with loading capacity above 40 tf.
Technical specifications
ÌMounting base
KrAZ 63221, KrAZ 7140 N6
Hook loading capacity, kN (tf), nominal,
981 (100)
Tackle system/tooling
8-string/ 4×5
Derrick
telescopic, 2- section derrick with racking platform
Derrick lifting and descending
by hydraulic jack and hydraulic motor winch
Height up to crownblock axis, m
22,6
Winch
single drum, hydraulic, with stepless remote control of speed and band and shoe brakes
- nominal tractive force on the second wrap raw, kN (tf)
148 (14,8)
- dia of hoist wireline as per GOST 16853, mm
25
- number of brake pulleys
2
- brake
band and shoe
- brake control
foot pneumatic and manual mechanical from driller’s station
Hook lifting speed, - max/min, m/s
1,5/0,15
Auxiliary winch
hydraulic, control from driller’s station
Crownblock
scatter sheave crown
Derrick lifting and descending
by hydraulic jack and hydraulic motor winch
control of tower lifting and extension
remote, from special console from land
Electric equipment
24V
Unit operating systems power supply
from vehicle alternator through storage battery or from external power source 220V through transformer and rectifier
Overall dimensions, mm: - length/width/height
13120/2500/4300
Total unit weight (not more), kgf
30000
Contact informationContact informationContact informationContact information
Contact informationOil Special Machinery Sales Department
Àäðåñ:
423603, Tatarstan, Elabuga, prospect Neftyanikov, 1, Trading House “ELAZ”